Electromagnetic or Motor-Driven Vibratory Feeder? How to Choose
Vibratory feeders move material along a tray or trough using controlled vibration. There are two main ways to create that vibration: an electromagnetic drive or one or more vibration motors. Both are proven designs, but they behave differently. The right choice depends on how accurately you need to feed, how much material you need to move and how the feeder will be controlled.

How an electromagnetic feeder works
An electromagnetic feeder has no rotating parts in its drive. An electromagnet pulls an armature towards it, and a set of springs returns it. The magnet is switched on and off by the supply, so the tray vibrates at a fixed frequency linked to the mains: typically 3,000 or 6,000 vibrations per minute on a 50 Hz supply, depending on how the drive is connected.
The springs and the vibrating mass are tuned so that the system runs close to its natural frequency. This lets a small magnet produce useful movement with modest power.
Feed rate is controlled by changing the voltage to the magnet, which changes the stroke. A controller makes this adjustment smooth and almost instant.
How a motor-driven feeder works
A motor-driven feeder uses one or two vibration motors fixed to the tray or its frame. The rotating eccentric weights inside the motors produce the vibrating force. With two motors turning in opposite directions, the forces combine into a straight-line movement that drives material along the tray.
These feeders usually run at a lower frequency, set by the motor speed, with a larger stroke. Feed rate can be adjusted by changing the eccentric weight setting or, more conveniently, by running the motors on an inverter.
Comparing the two
Feed rate control and response. Electromagnetic feeders start, stop and change rate very quickly, which suits dosing, weighing and batching. Motor-driven feeders take longer to run up and coast down.
Capacity and size. Motor-driven feeders scale well to large trays and high tonnages. Electromagnetic feeders are most common for small to medium duties.
Material. The shorter, faster stroke of an electromagnetic feeder suits fine and free-flowing products and small components. The longer stroke of a motor-driven feeder handles heavier, coarser or more variable material.
Maintenance. An electromagnetic drive has no bearings to wear, but its tuning can be affected by build-up on the tray, loose fixings or changes to the tray. A motor-driven feeder is less sensitive to tuning but has motor bearings that need periodic attention.
Noise. Electromagnetic feeders can hum at their operating frequency. Motor-driven feeders produce a lower-pitched sound and some bearing noise.
Which should you choose?
An electromagnetic feeder is often the better option when you need precise, quickly adjustable feed rates for smaller quantities, such as filling, weighing or feeding a packing machine. Our magnetic dosing feeder is designed for this kind of duty.
A motor-driven feeder is often the better option for higher capacities, heavier materials, larger trays or harsh conditions. See our range of vibrating feeders.
In many lines, the decision also depends on what sits upstream and downstream. A feeder discharging from a hopper, or feeding a spiral elevator, needs to suit the capacity and control of the whole system.
Talk to us about your application
Send us details of your material, the feed rate you need and how the feeder will be controlled, and we can recommend a suitable design. Where the material's behaviour is uncertain, a trial can confirm the choice. Call Geraldo on 0800 001 6520 or email sales@spiralelevator.com.





Comments